How To Use Equate Temple Touch Thermometer

DIGITAL TEMPLE THERMOMETER
KD-2202

LIN STTHREURCMTIOONM MEATNEURAL
Please read carefully before using

DEVICE Clarification AND INTENDED USE

The thermometer is an electronic device intended to measure the human trunk temperature using the brow equally measurement site. It tin can be used with adult or pediatric patients in household environment.

HOW TO USE
Measurement Consideration

CAUTION

Make certain the measuring site is dry, make clean and gratis of sweat and cosmetics prior to measurement taking.
Clean the probe before and afterwards each measurement to forestall cross-contagion, see Cleaning & Disinfection.
After cleaning and disinfecting the probe, delight wait at least two minutes to do a measurement.

Place the probe on the temple. Temple expanse is located between the outer corner of the eye and the hairline, right on summit of the temporal artery surface area.
For the almost accurate measurements, exist sure to hold the probe firmly (but not too hard) on temple.
In one case yous have placed the probe on the temple, do non move before the measuring is done.

Doing a Measurement

Press the ON/OFF button to turn on the device, it will auto self-diagnosis.
When all symbols appear on the brandish, the self-diagnosis is finished, it is ready
for measuring.
Afterwards the device beeps twice, place the probe on the measuring site.
The measurement is done when you lot hear one long beep.
Read the temperature on LCD.
Backlight will calorie-free upwards in accordance with the reading. Delight refer to Table 1.
The device's fever warning volition beep continuously when the temperature reading
is higher than 99.five°F.
Printing and hold the ON/OFF button to turn off the device or the device volition shut
off automatically within threescore seconds of inactivity.

Read-dorsum last retentivity by NFC
Install OUcare APP from Google play or App Store successfully. OUcare not only collect temperatures but also can do graph for checking temperature's trend easily.

For Android mobile device: When the device is off, put mobile device
higher up the thermometer, the terminal temperature will be read-dorsum and
show on mobile device.

For iPhone7 or higher up: The iOS should be 11.0 or above. When the
device is off, press the NFC icon of APP then close to the thermometer,
the last temperature will be read-back and show on mobile device.
Refer to the effigy of NFC surface area of iPhone7 in the right.

CONTRAINDICATIONS

The thermometer is contraindicated:

Identify the thermometer probe on scarred tissue or tissue compromised by whatever disorders of measuring site.
Identify the thermometer probe on peel exposed to direct sunlight, fireplace oestrus, cold shrink therapies, air conditioner flow, etc.
Patients in trauma or treat with certain drug therapies.

SETTING

Setting °C or °F Scale

Turn unit on. While 188.eight is still showing press & concord the power button over again for two seconds.
As shortly every bit you hear a short beep, immediately press the ON/OFF button again
but concur downwardly for most 2 seconds until you encounter the °C or °F change. Release the
button as before long as change occurs.
Press and hold the ON/OFF button again for 2 seconds to switch back and forth
from °C to °F.
Whichever scale shows when y'all release the ON/OFF button will be the scale the device will show for the measurement.
The device will be gear up for measuring later on the hourglass disappears and you
hear ii short beeps.

Retentiveness FUNCTIONS

Recall Memory

To recollect a memory, you must begin with the device beingness powered off.
Printing and hold the ON/OFF button until the last record shows.
Printing and release the ON/OFF push button to recall up to 9 previous records.
If no operation, the device will beep twice indicating it is fix for measuring

Delete Retention

Echo RECALL MEMORY step 1 and step 2.
Press and concord the ON/OFF button for almost 3 seconds until "dEL".
Press and release the ON/OFF push button again to delete all stored records in
device.
The device volition power off automatically.

Otherwise

To finish deleting memory, no functioning when you run across "dEL".
The device will be ready for measuring afterwards 2 seconds.

DEVICE OVERVIEW & Display OVERVIEW

QUICK Beginning

Install batteries into the device. Make sure the polarity (+ and -) of the batteries
matches as shown in the battery compartment.
Press and release the ON/OFF push button, the device will exist turned on then fix
for measurements.
Place the probe on the measuring site and wait for a few seconds.
The measurement is completed with beep.
Read the temperature on the display.

PRODUCT SPECIFICATION

EXPLANATION OF SYMBOLS

TROUBLESHOOTING

Bombardment INSTALLMENT

Warning
Use only same type of element of group i batteries to avoid incompatibility.
Memory may be erased afterward replacing a new battery.

Supervene upon with 2 new AAA batteries simultaneously when the depression battery indication appears.
Remove batteries if the device is non probable to be used for a long period of time.
Practice non dispose the batteries in a fire, the batteries will explode.

Replace Battey

Remove the battery cover to insert batteries.
Confirm the polarity (+ and -) of batteries are right as indicated inside the compartment and insert batteries accordingly.
Replace the bombardment cover.

CLEANING & DISINFECTION

To make clean and disinfect the device, employ a cotton wool swab or pad moistened with 70% alcohol to wipe the Sensor and Probe.
Utilise a cloth dampened with water or neutral detergent to clean and dry the device.
Practice not use thinner, benzene, and other harsh cleaners for cleaning the device.
Practice not immerse the unit in h2o or liquid of any kind.The unit is not h2o proof.

Exercise not submerge or expose the device to water.
Do not utilize corrosive detergent to make clean the device. Clean and disinfect the thermometer before and afterward utilise.

Cleaning process:

Pre-cleaning with cold water wash several times.
Clean the probe with a solution of 5-10% mild detergent about 10-15 seconds.
Continuously clean with common cold water to avert any chemical residues remaining on the device.
Rinse the device with drinking water or distilled water to ensure the removal of all remnants of the cleaning agent.
If necessary, repeat step 2 through step four in order to make sure the device is clean.
A last wipe down by a make clean wipe is necessary to avert of water stains.

Disinfection process:

To disinfect the device when completed the cleaning process.
Wipe the probe with a cloth dipped in a disinfectant solution such as lxx-75% isopropyl (rubbing) booze solution: contact time ≥10 minutes for disinfection.
The disinfectant gratis rinse without residues.

Drying procedure:

Later on cleaning and disinfection process to a higher place.
Put the device to air-dry in the room temperature 68-86°F, exposure time around xxx-60 minutes.

CARE AND STORAGE

Practise non drop or beat the device. It is not shock proof.
Practise not dismantle or modify the device other than changing the batteries.
Do non store the device in an farthermost surround with direct sunlight, loftier/low temperatures or in a location with high humidity or severe dust.

Delight contact your local agents or distributors if the device does non part properly as specified under Product Specification.

SAFETY INSTRUCTIONS

Alert:

Read the entire instruction transmission before trying to operate the device.
The device is delivered non-sterile; delight clean the device before measuring.
Stop using the device if malfunctions appear or if it operates abnormally.
Children should non utilize the device without the supervision of an adult. Keep out of reach of unsupervised children.
Do not use the device when flammable materials are around.
Do not identify the device on scarred tissue, open wounds or abrasions.
Some medications may cause a ascent in skin temperature which can consequently atomic number 82 to incorrect measurements.
Taking a measurement after skin has been exposed to an extreme condition such every bit direct exposure to sunlight, fireplace/ heater or air conditioner flow, may lead to wrong readings.
If the device has been kept or stored in extreme temperatures, look at least one hour for the device to render to room temperature earlier measuring.
Do not touch the probe, unless the device is taking a measurement.
The device is non water resistant, please keep dry out.
Exercise not drop the thermometer or expose it to heavy shock.
Do not seize with teeth or swallow the probe and the battery comprehend.
Practice not let thermometer come into contact with whatsoever thinner or chemic solvents
Components may exist harmful if swallowed. Contact a md immediately should this occur.
Exercise non use it if the display malfunctions or information technology operates irregularly.
Do non put this unit in dishwasher.
Performance of the thermometer may be degraded if: operated or stored outside stated temperature and humidity ranges or if the patient's temperature is below the ambience (room) temperature.
Just use the thermometer indoors and do not apply information technology near mobile phones or microwave ovens. In the case of thermometer whose maximum power exceeds ii W, the minimum distance from thermometer should be 3.3 meters (11 anxiety).
The reading is for reference, if you feel sick or uncomfortable, please contact the physician.

CAUTIONS:

Practice non scrape or scratch the probe as it will hamper the effectiveness of the device.
Exercise not dismantle the device except when replacing the battery.
Wait at to the lowest degree thirty minutes afterward exercising, bathing or eating earlier taking a measurement.
If the subject's body temperature is lower than the room temperature, a simulated reading may occur.
To ensure the best performance of the device, please follow the Product SPECIFICATION "Storage condition" regarding temperature and humidity ranges for storing the device.
Dispose of the device and batteries according to your local regulatory or environmental protection agency.

ABOUT Body TEMPERATURE

A person's normal body temperature tin range from 95.9°F to 100.0°F throughout the mean solar day. We recommend taking your temperature at different times during the twenty-four hour period when you are Non sick. This will give you a preliminary reference to know what your normal temperature is and how it fluctuates during a normal twenty-four hour period. And then, when you feel sick or uncomfortable, knowing this data volition provide an index for a reliable diagnosis of a fever.

WARRANTY INFORMATION

Warranty:
The device itself (battery excluded) comes with ane year warranty from purchase date if it is operated nether normal circumstances without evidence of tampering. See exclusions below

Warranty exclusions:

If user does non properly operate the device according to the instructions every bit described in this manual.
If the device shows signs of tampering or attempted modification.
Improper handling, such every bit dropping, liquid or cleaner damage.
Natural disasters (such as fire, flood, earthquake, lightning strike).
If you do non have a receipt or proof of purchase showing appointment of purchase.

LOT NUMBER INFORMATION

LOT NO.(YYMM) on the device characterization means the year and month of manufacturing. For instance, "1904" means the device was manufactured in Apr, 2019.

FCC Statement

This device complies with Role 15 of the FCC Rules. Operation is subject to the following two conditions: (ane) This device may non crusade harmful interference, and (2) this device must accept any interference received, including interference that may crusade undesired functioning. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Function xv of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if non installed and used in accord with the instructions, may crusade harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for aid.
FCC Caution: Any changes or modifications non expressly approved by the party responsible for compliance could void the user'southward authority to operate this equipment.
This transmitter must not exist co-located or operating in conjunction with any other antenna or transmitter.

Radiations Exposure Statement:
The production comply with FCC portable RF exposure limit set along for an uncontrolled
environment and are safe for intended operation every bit described in this manual. The further RF exposure reduction can be accomplished if the product can be kept equally far as possible from the user body or set the device to lower output ability if such office is available.

Changes or modifications not expressly approved by 180 INNOVATIONS may void the user'south authority to operate this devise.

Questions about your Manual ? Mail in the comments!